how many coatings af Anchorseal to apply?

how many coatings af Anchorseal to apply?

Post by espressoMar » Fri, 22 Sep 2006 01:14:58



Hello,

I just when out and cut some bircha and have put on one coat of
Anchorseal. Is that enough or are multiple coats required?

Thank you

Marvin

 
 
 

how many coatings af Anchorseal to apply?

Post by Darrell Feltmat » Fri, 22 Sep 2006 20:02:24


Marv
One coat is fine if it is put on heavy with a brush. Spraying will likely
need two coats a day apart. If it is going to sit a long time in sunlight,
two coats are recommended but I tend to use only one with decent results.

______
God bless and safe turning
Darrell Feltmate
Truro, NS, Canada
www.aroundthewoods.com

Quote:
> Hello,

> I just when out and cut some bircha and have put on one coat of
> Anchorseal. Is that enough or are multiple coats required?

> Thank you

> Marvin


 
 
 

how many coatings af Anchorseal to apply?

Post by Dan Bollinge » Sat, 23 Sep 2006 05:44:56


Like Marvin says, one heavy coat is enough. Keep applying until it stops soaking
in.  If I later cut the long into pieces and slabs I'll recoat so any places it
was scraped off are good againg.


Quote:
> Hello,

> I just when out and cut some bircha and have put on one coat of
> Anchorseal. Is that enough or are multiple coats required?

> Thank you

> Marvin

 
 
 

how many coatings af Anchorseal to apply?

Post by espressoMar » Sat, 23 Sep 2006 07:11:33


thank you

Marvin

Quote:

> Hello,

> I just when out and cut some bircha and have put on one coat of
> Anchorseal. Is that enough or are multiple coats required?

> Thank you

> Marvin