Found Collection

> I have never flown a RC helicopter before nor built one. I have heard
> the X-cell 60 ST is a good start if I had wanted to built a scale .60
> helicopter. Has anyone out there built a X-cell 60 ST? These are they
> parts I will be ordering with it. Am I missing anything else that can
> make it fly besides tools, fuels, and starters?

>     - X-cell 60 ST kit
>     - OS .61SXH-WC engine
>     - (NEED SUGGESTION ON QUIET MUFFLER)
>     - (NEED SUGGESTION ON SERVOS)
>     - Telebee HH Gyro
>     - 8UHPS Futaba PCM radio
>     - (NEED SUGGESTION ON GLOW PLUGS)

>  All the help would be greatly appreciated.

> Thanks,
> Kev

> P.S. If you have built a X-cell 60, do you mind listing what parts you
> used?

> Sent via Deja.com http://www.deja.com/
> Before you buy.

> I have never flown a RC helicopter before nor built one. I have heard
> the X-cell 60 ST is a good start if I had wanted to built a scale .60
> helicopter. Has anyone out there built a X-cell 60 ST? These are they
> parts I will be ordering with it. Am I missing anything else that can
> make it fly besides tools, fuels, and starters?

>     - X-cell 60 ST kit
>     - OS .61SXH-WC engine
>     - (NEED SUGGESTION ON QUIET MUFFLER)
>     - (NEED SUGGESTION ON SERVOS)
>     - Telebee HH Gyro
>     - 8UHPS Futaba PCM radio
>     - (NEED SUGGESTION ON GLOW PLUGS)

>  All the help would be greatly appreciated.

> Thanks,
> Kev

> P.S. If you have built a X-cell 60, do you mind listing what parts you
> used?

> Sent via Deja.com http://www.deja.com/
> Before you buy.

> I have never flown a RC helicopter before nor built one. I have heard
> the X-cell 60 ST is a good start if I had wanted to built a scale .60
> helicopter. Has anyone out there built a X-cell 60 ST? These are they
> parts I will be ordering with it. Am I missing anything else that can
> make it fly besides tools, fuels, and starters?

>     - X-cell 60 ST kit
>     - OS .61SXH-WC engine
>     - (NEED SUGGESTION ON QUIET MUFFLER)
>     - (NEED SUGGESTION ON SERVOS)
>     - Telebee HH Gyro
>     - 8UHPS Futaba PCM radio
>     - (NEED SUGGESTION ON GLOW PLUGS)

>  All the help would be greatly appreciated.

> Thanks,
> Kev

> P.S. If you have built a X-cell 60, do you mind listing what parts you
> used?

> Sent via Deja.com http://www.deja.com/
> Before you buy.

> Kev,

> I just finished an XCell CT ... it's a VERY nice heli and has several
> upgrades from the ST.  Add up the $ to get from the ST to the CT
later ...
> maybe worth a thought.

> My CT was my second helicopter, the Raptor being my first.  All I can
say is
> that I am really glad that I built a Raptor first, the CT would have
been a
> bit much for my first bird.  If you have some experienced help in
your area,
> go for the XCell!  Otherwise you may want to start with something
simpler
> (and cheaper).

> You can see some photos of my CT under construction in the photo
gallery at:

> http://home.rmci.net/iha

> Burt

> PS.  Make sure you get a fuel filter with a large filter surface area,
> cheaper filters can really cause some interesting problems.

> > I have never flown a RC helicopter before nor built one. I have
heard
> > the X-cell 60 ST is a good start if I had wanted to built a scale
.60
> > helicopter. Has anyone out there built a X-cell 60 ST? These are
they
> > parts I will be ordering with it. Am I missing anything else that
can
> > make it fly besides tools, fuels, and starters?

> >     - X-cell 60 ST kit
> >     - OS .61SXH-WC engine
> >     - (NEED SUGGESTION ON QUIET MUFFLER)
> >     - (NEED SUGGESTION ON SERVOS)
> >     - Telebee HH Gyro
> >     - 8UHPS Futaba PCM radio
> >     - (NEED SUGGESTION ON GLOW PLUGS)

> >  All the help would be greatly appreciated.

> > Thanks,
> > Kev

> > P.S. If you have built a X-cell 60, do you mind listing what parts
you
> > used?

> > Sent via Deja.com http://www.deja.com/
> > Before you buy.

>   Thanks Burt. What servo's did you use for your x-cell?

> -Kev

> > Kev,

> > I just finished an XCell CT ... it's a VERY nice heli and has several
> > upgrades from the ST.  Add up the $ to get from the ST to the CT
> later ...
> > maybe worth a thought.

> > My CT was my second helicopter, the Raptor being my first.  All I can
> say is
> > that I am really glad that I built a Raptor first, the CT would have
> been a
> > bit much for my first bird.  If you have some experienced help in
> your area,
> > go for the XCell!  Otherwise you may want to start with something
> simpler
> > (and cheaper).

> > You can see some photos of my CT under construction in the photo
> gallery at:

> > http://home.rmci.net/iha

> > Burt

> > PS.  Make sure you get a fuel filter with a large filter surface area,
> > cheaper filters can really cause some interesting problems.