Looking For Aluminum A-Arms For RC10GT

Looking For Aluminum A-Arms For RC10GT

Post by TrippinBallz.. » Thu, 04 Mar 1999 04:00:00



i have a RC10GT Sport Truck, have all the hop up parts for the Team
version installed, i am now trying to get everything in Aluminum or
Titanium, i have the A-Main Racing chassis, racing teflon shocks, O.S.
CV .15 engine. MIP Stinger exhuast, MIP CVD's, Graphite Shock Towers,
graphite chassis brace, titanium tie rods, bearing kit, have aluminum
diff gear, 15t 32p clutch bell with 64t 32p spur gear for low end gear
set, and 24t 32p clutch bell with 54t 32p spur gear for a high end gear
set for oval racing, am looking to get averything made from Aluminum,
have like 65% so for, main thing i am looking for is Aluminum or
Titanium A-Arms, if you can help please email me at

                                Thanx

If your on WebTv and your tired of TalkCity Chat, check out this site
 
 
 

Looking For Aluminum A-Arms For RC10GT

Post by J Bartlet » Fri, 05 Mar 1999 04:00:00


If you have a set to spare and aren't in a big hurry for them, I have a friend who can make a set for you.  I can put you in contact with him if you like.

    i have a RC10GT Sport Truck, have all the hop up parts for the Team
    version installed, i am now trying to get everything in Aluminum or
    Titanium, i have the A-Main Racing chassis, racing teflon shocks, O.S.
    CV .15 engine. MIP Stinger exhuast, MIP CVD's, Graphite Shock Towers,
    graphite chassis brace, titanium tie rods, bearing kit, have aluminum
    diff gear, 15t 32p clutch bell with 64t 32p spur gear for low end gear
    set, and 24t 32p clutch bell with 54t 32p spur gear for a high end gear
    set for oval racing, am looking to get averything made from Aluminum,
    have like 65% so for, main thing i am looking for is Aluminum or
    Titanium A-Arms, if you can help please email me at

                                    Thanx

 
 
 

Looking For Aluminum A-Arms For RC10GT

Post by Tommy Chenaul » Fri, 05 Mar 1999 04:00:00


I'm looking for aluminum parts too, but for the Kyosho Ram.  Would like
any info you could send.   Thanks.
 
 
 

Looking For Aluminum A-Arms For RC10GT

Post by wood » Fri, 05 Mar 1999 04:00:00


Hobby ect.,inc. in the RCCA mag has GPM RACEING PRODUCTS alloy frt and
rear a-arm set.   but they are 40$ a set.   Thats 80$ for front and rear
arms!    a bit high for me.   they also have alloy steering knuckels,
rear arm mount, c- hub, rear hub, and disk brake.

Quote:

> i have a RC10GT Sport Truck, have all the hop up parts for the Team
> version installed, i am now trying to get everything in Aluminum or
> Titanium, i have the A-Main Racing chassis, racing teflon shocks, O.S.
> CV .15 engine. MIP Stinger exhuast, MIP CVD's, Graphite Shock Towers,
> graphite chassis brace, titanium tie rods, bearing kit, have aluminum
> diff gear, 15t 32p clutch bell with 64t 32p spur gear for low end gear
> set, and 24t 32p clutch bell with 54t 32p spur gear for a high end gear
> set for oval racing, am looking to get averything made from Aluminum,
> have like 65% so for, main thing i am looking for is Aluminum or
> Titanium A-Arms, if you can help please email me at

>                                 Thanx

>    ----------------------------------------------------------------
> If your on WebTv and your tired of TalkCity Chat, check out this site
>                                [Image]

--
<><><><><><><><><><><><><><><><>><><><><><><><><><><>
      E-Mail

<><><><><><><><><><><><><><><><>><><><><><><><><><><>
   Radio Control everything page!
  http://www.geocities.com/Baja/5710/
<><><><><><><><><><><><><><><><>><><><><><><><><><><>
   Collectable Wheaties Box page!
  http://www.geocities.com/Baja/5710/wheaties/
<><><><><><><><><><><><><><><><>><><><><><><><><><><>
 
 
 

Looking For Aluminum A-Arms For RC10GT

Post by doug » Fri, 05 Mar 1999 04:00:00


There is a local guy here (albany, ny) who advertises in RCCA a lot.  He does
a lot of custom machine work, or at least used to, and maybe he can help you
out.  His newest thing is the clear lexan shocks..  In the april issue, he is
on pages 72+73. (518)782-9255 Hammad Ghuman is his name I guess.

-Doug

Quote:

> Hobby ect.,inc. in the RCCA mag has GPM RACEING PRODUCTS alloy frt and
> rear a-arm set.   but they are 40$ a set.   Thats 80$ for front and rear
> arms!    a bit high for me.   they also have alloy steering knuckels,
> rear arm mount, c- hub, rear hub, and disk brake.


> > i have a RC10GT Sport Truck, have all the hop up parts for the Team
> > version installed, i am now trying to get everything in Aluminum or
> > Titanium, i have the A-Main Racing chassis, racing teflon shocks, O.S.
> > CV .15 engine. MIP Stinger exhuast, MIP CVD's, Graphite Shock Towers,
> > graphite chassis brace, titanium tie rods, bearing kit, have aluminum
> > diff gear, 15t 32p clutch bell with 64t 32p spur gear for low end gear
> > set, and 24t 32p clutch bell with 54t 32p spur gear for a high end gear
> > set for oval racing, am looking to get averything made from Aluminum,
> > have like 65% so for, main thing i am looking for is Aluminum or
> > Titanium A-Arms, if you can help please email me at

> >                                 Thanx

> >    ----------------------------------------------------------------
> > If your on WebTv and your tired of TalkCity Chat, check out this site
> >                                [Image]

> --
> <><><><><><><><><><><><><><><><>><><><><><><><><><><>
>       E-Mail

> <><><><><><><><><><><><><><><><>><><><><><><><><><><>
>    Radio Control everything page!
>   http://www.geocities.com/Baja/5710/
> <><><><><><><><><><><><><><><><>><><><><><><><><><><>
>    Collectable Wheaties Box page!
>   http://www.geocities.com/Baja/5710/wheaties/
> <><><><><><><><><><><><><><><><>><><><><><><><><><><>

 
 
 

Looking For Aluminum A-Arms For RC10GT

Post by ------ADAM----- » Sun, 07 Mar 1999 04:00:00


Those looked really cool, and a great idea.
Quote:

> There is a local guy here (albany, ny) who advertises in RCCA a lot.  He does
> a lot of custom machine work, or at least used to, and maybe he can help you
> out.  His newest thing is the clear lexan shocks..  In the april issue, he is
> on pages 72+73. (518)782-9255 Hammad Ghuman is his name I guess.

> -Doug


> > Hobby ect.,inc. in the RCCA mag has GPM RACEING PRODUCTS alloy frt and
> > rear a-arm set.   but they are 40$ a set.   Thats 80$ for front and rear
> > arms!    a bit high for me.   they also have alloy steering knuckels,
> > rear arm mount, c- hub, rear hub, and disk brake.


> > > i have a RC10GT Sport Truck, have all the hop up parts for the Team
> > > version installed, i am now trying to get everything in Aluminum or
> > > Titanium, i have the A-Main Racing chassis, racing teflon shocks, O.S.
> > > CV .15 engine. MIP Stinger exhuast, MIP CVD's, Graphite Shock Towers,
> > > graphite chassis brace, titanium tie rods, bearing kit, have aluminum
> > > diff gear, 15t 32p clutch bell with 64t 32p spur gear for low end gear
> > > set, and 24t 32p clutch bell with 54t 32p spur gear for a high end gear
> > > set for oval racing, am looking to get averything made from Aluminum,
> > > have like 65% so for, main thing i am looking for is Aluminum or
> > > Titanium A-Arms, if you can help please email me at

> > >                                 Thanx

> > >    ----------------------------------------------------------------
> > > If your on WebTv and your tired of TalkCity Chat, check out this site
> > >                                [Image]

> > --
> > <><><><><><><><><><><><><><><><>><><><><><><><><><><>
> >       E-Mail

> > <><><><><><><><><><><><><><><><>><><><><><><><><><><>
> >    Radio Control everything page!
> >   http://www.geocities.com/Baja/5710/
> > <><><><><><><><><><><><><><><><>><><><><><><><><><><>
> >    Collectable Wheaties Box page!
> >   http://www.geocities.com/Baja/5710/wheaties/
> > <><><><><><><><><><><><><><><><>><><><><><><><><><><>